Precision Parts Manufacturing for Automation
DEK machines precision mechanical parts for the automation industry, with tight tolerances controlled within ±0.005 mm. One partner from prototyping to production, with in-house inspection.
-
ISO 9001
Custom Automation Equipment Parts Manufacturer
As an ISO 9001 certified manufacturer, DEK machines high-precision components for automation equipment to ±0.005 mm, in aluminum alloys, stainless steel, carbon steel and engineering plastics, so every part stays durable and wear-resistant.
Typical applications include EOATs, jigs, gears, shafts, robotic arm joint housings and structural frames. Parts can be CNC machined and finished with anodizing, electroplating, black oxide or passivation, with all inspection done in-house.
What Automation Buyers Need
- Tolerances held to ±0.005 mm on production-grade materials
- Both low and high volumes, with no minimum order quantity
- CMM inspection reports, FAI reports and material certificates
- RoHS certifications supplied with the parts
-
0.005mm
Machining Tolerance (±)
-
5-7
Business Days, Prototypes
-
2-3
Weeks, Low-Volume Runs
-
24/7
Engineering Support
Typical Automation Components
From mounting plates to robot base frames, we machine the structural and motion parts that automation equipment is built on.
-
Automation Machined PartsComplex machined components for automation equipment, milled and turned to tight tolerances in production-grade materials. -
Equipment Mounting PlatesFlat plates that locate actuators, sensors and fixtures on automation machines, milled from aluminum alloys. -
Steel Machine PartsCarbon steel parts such as gears, shafts and support arms for automation components that carry heavy loads. -
Equipment BracketsMachined equipment brackets that give structural support to sensors, actuators and assemblies on automation lines. -
Automation Equipment BracketsStructural brackets in aluminum or carbon steel for automation equipment, finished with anodizing or black oxide. -
Fixture Base PlatesFixture base plates and jig bases machined flat and square to locate parts repeatably in automation fixtures. -
Robot Base FramesRigid base frames and pedestals for robots, machined from aluminum or steel for stable, accurate mounting. -
Linear Motion PartsLinear motion guide components machined from aluminum, a lightweight choice for repeatable motion in automation.
Automation Component Manufacturing Capabilities
Machining processes, finishes, inspection and lead times for automation parts, from one prototype to batch production.
Materials for Automation Parts
Four metal families cover most automation parts, chosen for weight, corrosion resistance, load capacity or conductivity.
-
Rapid Prototype
AluminumAluminum alloysWidely used in robotics and structural frameworks: robotic arms, machine frames, conveyor frames, guarding, linear motion guides and motor housings. -
Stainless SteelCorrosion-resistant steelCorrosion resistance and strength for clean, demanding environments: wafer handling equipment, sensor and actuator housings, fasteners and fittings. -
Carbon SteelStructural steelHigh strength, low cost and good machinability for heavy-load parts: gears, shafts, structural brackets, support arms and heavy-duty machine bases. -
CopperCopper, brass, bronzeChosen for electrical and thermal conductivity: electrical connectors, terminals, pins, heat sinks, heat exchangers, bearings and bushings.
Why Choose Our Services
One-stop production of high-quality parts saves you time and money, from the first drawing review to delivery.
-
Engineering Capabilities
Mechanical engineers with 10+ years in programming, machining, post-processing and materials review every drawing and return DFM feedback before the first chip is cut.
-
Fast Lead Time
In-house 3-axis and 5-axis capacity, no minimum order quantity, and quick-turn scheduling when a part is holding up a build.
-
Quality Control
In-process and final inspection on CMM (Coordinate Measuring Machine), with inspection reports, FAI reports and material certifications supplied on request.
-
Surface Finishes
Passivation, anodizing, electroplating, PVD and QPQ coating applied in line with machining, so corrosion protection is part of the same order.
Our Ordering Process
Materials and Finishes for Automation
Pick the metal, plastic and finish combination that matches your load, environment and conductivity needs.
Surface Finishes
Engineering Plastics
Need a material not listed here? Ask our engineers.
View MaterialsAutomation Parts Buying FAQs
Common questions from automation equipment buyers and engineers.
Get an Accurate Quote within 6 Hours
We don’t use online automated quotation tools: a mechanical engineer reviews every drawing, so the price reflects how the part is really made.
- Accurate quote within 6 hours
- Engineers with 10+ years of experience
- Heat-treatment deformation priced in
- Tight tolerances and grinding reviewed
- No price from cutting volume alone
Ready to Scale Your Project?
Get started with a stable process and controlled quality. Let's discuss your project.
