This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
- Home
- Materials
- CNC Machining Plastic
- Nylon
- Nylon 6 30% Glass Filled
Nylon 6 30% Glass Filled
Material Type
Plastic
Material Name
Nylon 6 30% Glass Filled
Alternative Names
Nylon 6 GF30 | PA6 GF30
Process Compatibility
CNC Machining, Injection Molding
introduction
Nylon 6 30% Glass Filled in CNC Machining and Injection molding
Nylon 6, 30% glass-filled, is a type of composite material that combines nylon 6 polymer with 30% glass fiber reinforcement.
Compared to unfilled nylon, this material exhibits improved strength, stiffness, and dimensional stability. It can also enhance other properties, such as heat resistance and resistance to wear and abrasion. Due to the presence of glass fibers, the material is abrasive and can cause more wear on cutting tools. Therefore, we use tools made of materials that can withstand abrasiveness, such as carbide or polycrystalline diamond (PCD). Glass-filled materials may require lower speeds to prevent excessive tool wear, so we adjust the cutting speed and feed rates to optimize the machining process.
Glass-filled materials can generate a significant amount of dust during machining. We implement an effective dust collection system to maintain a clean working environment and protect both the machine and the operators. After machining, we inspect the finished parts for any signs of tool wear, surface defects, or dimensional inaccuracies. Additional post-processing steps, such as polishing, may be required depending on the application and desired surface finish.
Properties
Properties Table of Nylon 6 30% Glass Filled
MECHANICAL PROPERTIES | |
---|---|
Ultimate Tensile Strength | 113-138.1 MPa |
Yield Strength | 111-137 MPa |
Young's Modulus | 6.5-8.1 GPa |
Elongation at Break | 2.81-4.05% |
Hardness | 35.6-39.4 HV |
Flexural Strength | ~170 MPa |
Impact Strength | ~45 kJ/m² |
Elasticity | High |
Modulus of Elasticity | ~6 GPa |
Creep Resistance | Good |
Wear Resistance | Good |
Machinability | Moderate |
Moldability | Good |
Physical Properties | |
UV Resistance | Fair |
Ductility and Flexibility | Moderate |
Density | ~1.40 g/cm³ |
Weight | Light |
Temperature Resistance | Up to approximately 120°C(248°F) |
Chemical Resistance | Good resistance to many chemicals |
Porosity | Low |
Thermal Properties | |
Maximum Service Temperature | 90-131°C |
Thermal Expansion Coefficient | 38.9-40.3 x 10^-6/°C |
Thermal Conductivity | 0.445-0.463 W/(m·°C) |
Electrical Properties | |
ESD Safety | No |
TECHNOLOGY OVERVIEW
Basic Knowledge of Nylon 6 30% Glass Filled
What is Nylon 6 30% Glass Filled?
Nylon 6 30% Glass Filled refers to a type of engineering thermoplastic material known as Nylon 6 that has been reinforced with 30% by weight of glass fiber. Nylon 6 itself is a polyamide polymer, and the addition of glass fibers enhances its mechanical and thermal properties. It is commonly used in automotive components, electrical connectors, consumer goods, and structural parts in engineering and machinery. The glass fiber content in the composite can be adjusted to achieve specific performance characteristics tailored to the application's needs.
Advantages of Nylon 6 30% Glass Filled
- Increased Strength and Rigidity
- Improved Dimensional Stability
- Enhanced Heat Resistance
- Increased Wear Resistance
- Reduced Creep
- Improved Chemical Resistance
- Lightweight
- Cost-Effective Alternative
- Electrical Insulation Properties
- Versatility for Various Applications
Applications of Nylon 6 30% Glass Filled
- Automotive radiator end tanks
- Electrical connectors
- Industrial gears
- Sports equipment frames (e.g., tennis racket frames)
- Aerospace structural components
- Medical device housings
- Oil and gas drilling equipment components
- Construction fasteners
- Consumer goods hand tools
- Appliance housings
FAQ
Machining Nylon 6 30% Glass Filled Buying FAQs
Other Materials
Polypropylene(PP)
Polypropylene (PP) is a thermoplastic polymer with high chemical resistance, low density, good electrical insulation, and low cost.
Nylon
Nylon (polyamide ) is an engineering thermoplastic that can be thermoformed and machined into a variety of shapes.
Garolite G-10
Garolite G-10 is a high-pressure fiberglass laminate with excellent electrical insulating properties, high mechanical strength, and chemical resistance.
Get An Accurate Quote For Your Next Projects
No matter your project is complicated or simple, no matter is metal or plastic, you will get an accurate quotation within 6 hours.
Get A Quote Today