Precision Brass Turned Parts
DEK machines brass turned parts in C360, CZ121 and 260 with ±0.005 mm on critical diameters. No MOQ, engineer-reviewed quotes, prototypes in as little as 3 days.
-
±0.005 mm
Critical Diameters
-
3 days
Fastest Prototype
-
98.6%+
On-Time Delivery
Brass Turned Components from Bar Stock
DEK turns C360, CZ121 and 260 brass bar stock into valves, connectors, bushings and sensor housings on CNC lathes and Swiss-type lathes. There is no minimum order quantity.
A single prototype and a full production run follow the same process: an engineer reviews your drawing and quotes it directly, not an automated calculator. Work runs under ISO 9001, AS9100D and ISO 13485 certification, with full alloy data on our brass machining page.
Why Source Brass Turned Parts from DEK
Certified quality, proven delivery and engineer-led quoting for brass turned components, from one prototype to repeat runs.
-
Certified Quality System
ISO 9001, AS9100D and ISO 13485:2016 certification obtained through TUV covers brass turned connectors and fittings.
-
20+ Years of Machining
More than 20 years in precision machining and a base of 2,300+ global OEM clients sourcing turned and machined parts.
-
98.6%+ On-Time Delivery
A 98.6%+ on-time delivery rate, with prototype brass turned parts shipping in as little as 3 days.
-
No MOQ, Same Process
No minimum order: a prototype and a repeat production run are quoted the same way, by an engineer reading your drawing.
Engineer-Reviewed Quotes
Every drawing is read by an engineer, not a fixed calculator. Ambiguous callouts are flagged before quoting, and DZR or lead-free requests are confirmed as achievable before we price them.
Brass Turned Parts Capabilities
Alloys, tolerances, machines and finishes for turned brass, from sub-10 mm micro features to large turned components.
Brass Turned Parts vs. Other Turned Metals
Choose brass for corrosion-resistant fittings and connectors; move to carbon steel or aluminum turning for other metal needs, or grind when turning alone cannot hold the OD.
| Criteria | This ProcessBrass turned parts | Carbon steel turning | Aluminum turning | Centerless grinding |
|---|---|---|---|---|
| Best for | Fittings, valves, connectors | Same part in steel | Lighter parts | Tighter OD after turning |
| Corrosion focus | Corrosion-critical parts | Different metal need | Non-corrosion-critical | Follows base metal |
| Process role | Primary turning | Primary turning | Primary turning | Secondary, after machining |
| Choose when | Machinability, cycle time | Steel is specified | Weight matters | OD beyond turning limits |
Industries Using Turned Brass
Brass turned parts serve aerospace, medical and fluid-handling applications under AS9100D and ISO 13485 quality systems.
-
Aerospace
-
Medical
-
Automotive
-
Robotics
-
Semiconductor
-
Electronic
-
Telecom
-
Drone & UAV
-
Energy
-
Oil & Gas
-
Marine
-
Industrial Equipment
-
Construction
-
Agriculture
-
Consumer Products
-
Military & Defense
-
Mining
-
AerospaceNon-flight-critical brackets, cabin hardware and fittings under AS9100D, in 7075 aluminum, Ti-6Al-4V and Inconel 718, with FAI.Learn More -
MedicalInstrument shafts, handles and cannulas in 316L stainless, titanium and PEEK under ISO 13485, with lot traceability as standard.Learn More -
AutomotivePrototype and low-to-mid-volume sensor housings, valve bodies and shafts in aluminum, 4140 and 4340 alloy steel, stainless and brass.Learn More -
RoboticsJoint housings, harmonic drive flanges and gripper fingers in aluminum and hardened steel, with 5-axis milling in one setup.Learn More -
SemiconductorChamber components, wafer handling fixtures and vacuum flanges in 6061 aluminum, 316L, PEEK and Kovar, with burr-free edges.Learn More -
ElectronicConnector bodies, heat sinks, RF shields and precision pins in aluminum, brass and copper, held to ±0.01 mm on contact features.Learn More -
TelecomWaveguide components, filter housings and RF enclosures in aluminum and copper alloys, with silver or nickel plating for conductivity.Learn More -
Drone & UAVMotor mounts, gimbal frames and landing gear fittings in 7075 aluminum, titanium and magnesium to cut weight without losing stiffness.Learn More -
EnergyBattery end plates, busbars, inverter housings and fuel-cell fittings in aluminum, copper and stainless, machined flat and burr-free.Learn More -
Oil & GasValve components, manifold blocks, downhole tool parts and flanges in 4140, 17-4 PH, duplex 2205 and Inconel, with hardness specs.Learn More -
MarinePropeller shafts, pump parts and deck hardware in 316 stainless, bronze and aluminum bronze, chosen first for corrosion resistance.Learn More -
Industrial EquipmentGripper plates, linear guide mounts, cam followers and machine frames in aluminum and steel, with fixtures kept on file for repeats.Learn More -
ConstructionStructural brackets, anchoring hardware and hydraulic fittings in mild steel, alloy steel and aluminum, zinc plated or powder coated.Learn More -
AgricultureGearbox housings, shafts, sprayer nozzle bodies and sensor mounts in cast iron, steel and stainless for abrasion and moisture.Learn More -
Consumer ProductsKnobs, handles, enclosure parts and audio hardware where the machined surface shows, anodized, bead blasted or polished to sample.Learn More -
Military & DefenseOptical mounts, enclosures and accessory rails in aluminum, steel and titanium, with material certification and FAI reports.Learn More -
MiningWear plates, bushings, crusher components and hydraulic fittings in hardened alloy steel, bronze and stainless for dust and vibration.Learn More
Turned Brass Parts We Manufacture
From brass fittings to sensor housings, these are the turned components we produce most, matched to the right alloy.
-
Valves and Valve Bodies
Typically produced in C360 for its corrosion resistance and machinability, with threads cut to your print.
-
Brass Fittings
Compression and pipe fittings in C360, the default grade for high-volume runs where cycle time matters. See fittings.
-
Bushings and Bearings
Turned brass bushings, with custom bushings ground after turning when the OD must be tighter.
-
Electrical Connectors
Electrical and fluid connectors, often in 260 when extra ductility is needed for crimping or staking.
-
Sensor Housings
Sensor housings needing secondary forming usually run in 260, with fit-critical bores held to ±0.005 mm.
-
Turned Brass Nozzles
Turned brass nozzles with coaxial bores, run on CNC or Swiss-type lathes depending on length and diameter.
Common Challenges We Handle
-
Lead-Free Requirements
C360, CZ121 and 260 are all leaded. Flag potable water or DZR needs on the RFQ and we confirm feasibility before quoting.
-
Slender Turned Features
High-aspect-ratio features run on Swiss-type lathes to hold geometry on slender brass parts.
-
Sub-10 mm Micro Features
Micro-turned features under 10 mm hold down to ±0.003 mm; see our micro machining capability.
-
Post-Turning Forming
Parts that are cold-formed, staked or crimped after turning run in 260 for its lower lead and higher ductility.
Certified Quality on Every Part
Brass turned parts are made under ISO 9001, AS9100D and ISO 13485, certified through TUV.
-
AS9100DAerospace Quality Management System
-
ISO 9001:2015Quality Management Standard
-
ISO 13485Medical Devices Quality Management
Brass Alloys and Finishes
Free-machining brass and cartridge brass grades, plus the finishes applied after turning. Pick the pairing that fits your part.
Surface Finishes
Need a different alloy or finish? Talk with our experts
All MaterialsHow to Order Brass Turned Parts
Brass Turned Parts FAQ
Lead times, drawings, finishes and order quantities for turned brass.
Request a Quote for Brass Turned Parts
Send a drawing for one prototype or a full production run. Every quote is reviewed by an engineer against your actual geometry and alloy.
- No MOQ, prototype to production
- Prototypes in as little as 3 days
- ±0.005 mm on critical diameters
- C360, CZ121 and 260 brass alloys
- ISO 9001, AS9100D, ISO 13485
Ready to Scale Your Project?
Get started with a stable process and controlled quality. Let's discuss your project.
