Drone components often require thin-wall structures, complex curved surfaces, and precise coaxiality. Maintaining dimensional stability while reducing weight presents machining challenges, especially on aluminum and magnesium alloys.
DEK applies 5-axis machining to control contour accuracy, EDM for narrow cavities, and precision grinding for critical fits. Toolpath planning minimizes deformation in thin sections while meeting ±0.01mm tolerances.
All parts undergo CMM and optical measurement to verify runout, perpendicularity, and surface finish. This ensures stable flight performance and long-term reliability.
We control deflection in 0.8mm thin-wall drone housings by optimized toolpath and step-down strategy. Fixtures with soft clamping reduce stress. CMM checks wall thickness after machining.
Drone propeller hubs require precise aerodynamic surfaces. We use simultaneous 5-axis milling to maintain contour accuracy within ±0.01mm. Surface roughness reaches Ra0.4 after finishing passes.
Critical fastener holes and threaded inserts are processed by precision tapping and thread gauges. Concentricity and pitch diameter are checked with GO/NOGO gauges. Thread runout kept within 0.02mm.
Aluminum drone arms receive Type III hard anodizing for wear and corrosion resistance. Thickness controlled at 20–25μm. Adhesion tested per MIL-A-8625 standards for aerospace compliance.
Precisão, rapidez de execução e zero defeitos - os engenheiros mecânicos confiam na DEK quando a falha não é uma opção.
Upload your CAD file now for a free DFM review and a precise quote from our engineering team.
