UHMW-PE

Tipo de material
Plástico
Nome do material
UHMW-PE
Nomes alternativos
Ultra-High Molecular Weight Polyethylene | High-Modulus Polyethylene | HMPE
Compatibilidade de processos
Maquinação CNC, Moldagem por injeção
UHMW-PE em Maquinação CNC e Moldagem por Injeção

Ultra High Molecular Weight Polyethylene (UHMW-PE) is a type of polyethylene with a very high molecular weight
UHMW-PE has minimal moisture absorption, excellent wear resistance, low friction, and high impact strength. It is known for its self-lubricating properties due to its low coefficient of friction. It is a thermoplastic material which softens when heated and hardens when cooled. UHMW-PE tends to melt rather than chip during machining, so we control the heat using higher cutting speeds and lower feed rates. Cooling is important to prevent overheating and melting, so we use coolants or air blasts during machining.
This material is lightweight, odorless, tasteless, and non-toxic. It shares properties with high-density polyethylene (HDPE) and offers additional benefits, such as resistance to concentrated acids, alkalis, and various organic solvents. It is highly resistant to corrosive chemicals, except for oxidizing acids. Furthermore, it has excellent abrasion resistance—up to 15 times more resistant than carbon steel in certain forms. Although its friction coefficient is similar to polytetrafluoroethylene (PTFE or Teflon), UHMW-PE has greater abrasion resistance.
Tabela de propriedades of UHMW-PE
PROPRIEDADES MECÂNICAS | |
---|---|
Resistência à tração final (UTS) | 38.6-48.3 MPa |
Resistência ao escoamento (0,2% offset) | 21.4-27.6 MPa |
Módulo de Young (Elasticidade) | 0.894-0.963 GPa |
Alongamento na rutura | 200-500% |
Dureza | 3.4-8.3 HV |
Propriedades físicas | |
Resistência aos raios UV | Bom |
Ductilidade e flexibilidade | Excelente |
Densidade | 0.93 g/cm³ |
Resistência química | Excelente |
Porosidade | Baixa |
Propriedades térmicas | |
Temperatura máxima de serviço | 80-110°C |
Coeficiente de expansão térmica | 234-360 x 10^-6/°C |
Condutividade térmica | 0.19-0.197 W/(m·°C) |
Propriedades eléctricas | |
Segurança ESD | Não |
Conhecimentos básicos of UHMW-PE
What is UHMW-PE?
Ultra-high-molecular-weight polyethylene (UHMW-PE) is a type of polyethylene, a thermoplastic material. It has exceptionally long molecular chains, typically ranging from 3.5 to 7.5 million atomic mass units (amu). The extended chain structure enhances load transfer within the material, leading to outstanding toughness and the highest impact strength among thermoplastics.
This material has high abrasion resistance, low friction, self-lubrication, non-stick surface, chemical fatigue and impact resistance, and effective noise dampening. It is highly resistant to wear and abrasion, performing well even at extremely low temperatures (as low as -259 degrees C). However, it starts to lose its abrasion resistance around 185 degrees F. Due to its significant expansion/contraction rate when temperatures change, UHMW is not recommended for close tolerance applications in environments with frequent temperature variations.
Advantages of UHMW-PE
- Baixo coeficiente de atrito
- High chemical resistance
- Excellent impact strength
- Baixa absorção de humidade
- Self-lubricating
- Leve
- High wear resistance
- FDA-approved for food contact
- Elevada resistência à tração
- Abrasion-resistant
Applications of UHMW-PE
- Bulletproof vests
- Correias transportadoras
- Implantes médicos
- Rolamentos e casquilhos
- Chute liners
- Ice rink barriers
- Marine fender pads
- Cable sheathing
- Cutting boards
- Gear wheels
- Synthetic ice surfaces
- Defense vehicle components
- Equipamento de processamento de alimentos
- Componentes para automóveis
- Wear strips
- Componentes da bomba
- Rollers and pulleys
- Insulators
- Componentes aeroespaciais
- Textile industry parts
Machining UHMW-PE FAQs sobre a compra
Outros Materiais

PEEK
PEEK significa Poliéter Éter Cetona, um polímero termoplástico semicristalino de alto desempenho com excelentes propriedades de resistência mecânica e química.

Nylon
O nylon (poliamida) é um termoplástico de engenharia que pode ser termoformado e maquinado numa variedade de formas.

ABS
O ABS (Acrilonitrilo Butadieno Estireno) é um polímero termoplástico duro e resistente ao impacto, composto por acrilonitrilo, butadieno e estireno.
Obter um orçamento exato Para os seus próximos projectos
Independentemente de o seu projeto ser complicado ou simples, de ser de metal ou de plástico, receberá um orçamento preciso no prazo de 6 horas.
Obter um orçamento hoje