Aço inoxidável 303

It is recognized for its easy machining process because of the sulfur and phosphorus in its composition, which act as lubricants during cutting. We use carbide tools and high-speed steel when machining 303. We also use cutting fluids to dissipate heat and prolong tool life. We avoid excessive heat so the material won't be harder. We always consider proper tooling, speeds, and feeds to achieve a good surface finish. While corrosion-resistant, 303 may not match the corrosion resistance of other stainless steel grades like 304 or 316. Post-machining or heat treatment is generally unnecessary, but solution annealing can enhance properties such as corrosion resistance.

Stainless steel 303 has challenging welding characteristics and is not generally recommended for welding, but it can be welded with some difficulty using Alloy 310 electrodes. After welding, it is advisable to anneal the material to dissolve precipitated carbides. In terms of machinability, high machining rates are achievable in the annealed condition with a hardness ranging from 200 to 240 Brinell. However, it tends to work harden, so machining should be done at reduced surface feet per minute and heavier feeds to prevent glazing at the tool interface.