Drone CNC Machining Service

Aluminum is a top choice in drone CNC machining thanks to its superior strength-to-weight ratio, corrosion resistance, and ease of machining. It's commonly used for drone frames, housings, and key structural parts requiring durability and reduced weight. High-performance alloys like 6061 and 7075 are preferred for their strength and precision.

At DEK, we specialize in CNC machining aluminum components tailored to meet the high standards of today’s advanced drone systems.

Сплав
AL6061, AL7075, AL5052, AL2024, etc.

Bronze is a strong, corrosion-resistant metal ideal for drone CNC-machining. It’s best for components that face constant movement or friction, such as bushings and wear parts. Its durability and excellent wear resistance make it perfect for applications requiring long-term performance and reliability. Bronze also offers high machinability, allowing for precise, custom components.

DEK delivers expertly machined bronze parts designed to meet the rigorous demands of modern drones and robotics systems.

Сплав
Бронза 544, 841, 932, 954 и др.

Copper is widely used in drone electronics due to its exceptional electrical conductivity and thermal performance. It's ideal for connectors, housings, and heat sinks, helping ensure efficient signal flow and heat dissipation. While too heavy for structural use, copper remains essential for internal components where reliability is critical.

DEK specializes in high-precision drone CNC machining of copper parts, supporting the advanced electronic and cooling requirements of today’s drone systems.

Сплав
Медь C101, C110 и т.д.

Magnesium is even lighter than aluminum, making it perfect for high-speed and racing drones where every gram counts. It offers excellent machinability and natural vibration damping, improving flight stability and control. In drone CNC machining, magnesium is often used for motor housings and internal structures requiring strength with minimal weight.

At DEK, we provide precision CNC machining of magnesium components engineered to boost performance in demanding, weight-sensitive drone applications.

Сплав
MgAZ318, MgAZ61B, MgAZ91D и др.

Stainless steel is a strong, corrosion-resistant material ideal for drone components that face tough conditions and require long-lasting durability. While heavier than aluminum, it’s perfect for critical parts like landing gear, arms, brackets, and fasteners where strength and reliability are essential. Its resilience makes it a top choice for rugged drone applications.

DEK offers high-precision drone CNC machining of stainless steel parts, ensuring dependable performance in demanding drone environments and challenging operating conditions.

Сплав
304, 316, 303, 410, 420, etc.

Titanium is valued for its outstanding strength-to-weight ratio, corrosion resistance, and ability to withstand high stress and temperatures. It’s ideal for drone components like engine mounts, fasteners, and other high-performance parts. Though more expensive and difficult to machine, titanium is essential in specialized or industrial-grade drones where reliability is critical.

DEK provides expert drone CNC machining of titanium components, delivering the precision, strength, and durability required for the most demanding drone applications.

Сплав
Титан Grade 1, Grade 2, Grade 5 и т.д.

Tool steel offers outstanding hardness, wear resistance, and durability, making it ideal for high-stress drone components like cutting tools, dies, and precision brackets. While too heavy for full drone frames, it excels in parts that must retain shape and sharp edges under extreme pressure and repeated use.

At DEK, we specialize in high-precision CNC machining of tool steel, producing rugged, long-lasting components tailored for demanding drone applications where strength and performance are non-negotiable.

Сплав
Инструментальная сталь A2, A3, D2, S7 и т.д.

Acrylic is a lightweight, transparent plastic commonly used in drones for covers, light housings, and windows where visibility and appearance matter. It machines and polishes easily, offering a clean, professional look ideal for non-load-bearing applications. While more brittle than other plastics, acrylic excels in areas where aesthetics, clarity, and weight savings are priorities. It’s frequently used in electronic enclosures or lighting elements in drone assemblies.

DEK provides precision-machined acrylic parts tailored for high-quality visual components used in drones, displays, and clear protective housings.

Delrin, also known as acetal, is a high-strength, low-friction plastic ideal for CNC-machined drone parts that require durability and dimensional accuracy. It’s commonly used for gears, pulleys, moving arms, and linkages due to its excellent wear resistance, stiffness, and low moisture absorption. Delrin performs reliably in dynamic assemblies and offers outstanding machinability, making it a go-to choice for high-precision drone mechanisms.

At DEK, we specialize in machining Delrin components for demanding drone applications such as control systems, structural linkages, and mechanical motion systems.

FR4 is a flame-retardant glass-reinforced epoxy laminate primarily used in drone electronics as the base material for printed circuit boards (PCBs). Lightweight and strong, it provides excellent electrical insulation, thermal resistance, and dimensional stability. While not suitable for structural parts, FR4 is essential for supporting and isolating electronic components in drone systems. It performs well in complex environments where consistent electrical performance is vital.

DEK delivers precision-machined FR4 parts for advanced electronics, including custom PCBs used in drones, aerospace, and high-tech robotics.

G-10 is a fiberglass-reinforced laminate similar to FR4 but with greater mechanical strength and toughness, making it better suited for structural applications in drones. It offers excellent moisture resistance, impact strength, and electrical insulation, making it a durable option for frames, baseplates, and mounting brackets. G-10 performs well in harsh environments, including both dry and humid conditions, without compromising structural integrity.

DEK offers precision drone CNC machining of G-10 components for rugged assemblies, ensuring durability and reliability in challenging operating conditions.

Nylon is a versatile, lightweight engineering plastic known for its toughness, flexibility, and wear resistance. In drone CNC machining, it’s often used for gears, bushings, vibration dampeners, and structural spacers. Nylon’s natural lubricity and resistance to chemicals make it ideal for moving components and harsh operating environments. It absorbs some moisture, which can be a design consideration, but it remains a reliable material for many dynamic drone systems.

At DEK, we deliver precision-machined nylon parts optimized for strength, resilience, and long-lasting performance in demanding drone applications.

PEEK (Polyether Ether Ketone) is a high-performance thermoplastic engineered for extreme environments. Known for its exceptional strength, chemical resistance, and heat tolerance, PEEK is often used in drones for internal brackets, high-load housings, and thermal protection components. It maintains dimensional stability under mechanical and thermal stress, making it ideal for aerospace-grade and industrial drone systems where consistent performance is critical.

DEK provides expert drone CNC machining of PEEK components tailored for high-stress, high-temperature applications that demand the highest level of material integrity.

PVC (Polyvinyl Chloride) is an affordable, chemically resistant plastic that is easy to machine and ideal for non-structural drone parts. Common applications include guards, cable covers, and housings, especially in outdoor environments where weather and moisture resistance are essential. While not as strong or heat-tolerant as engineering plastics like PEEK or Nylon, PVC performs well for protective and insulating components in drone designs.

At DEK, we machine high-quality PVC parts designed for lightweight, corrosion-resistant protection in drones operating in wet, dusty, or corrosive conditions.