Nylon 6 30% Relleno de vidrio
Tipo de material
Plástico
Nombre del material
Nylon 6 30% Relleno de vidrio
Nombres alternativos
Nylon 6 GF30 | PA6 GF30
Compatibilidad de procesos
Mecanizado CNC, Moldeo por inyección
Nylon 6 30% Glass Filled in CNC Machining and Injection molding
Nylon 6, 30% glass-filled, is a type of composite material that combines nylon 6 polymer with 30% glass fiber reinforcement.
Compared to unfilled nylon, this material exhibits improved strength, stiffness, and dimensional stability. It can also enhance other properties, such as heat resistance and resistance to wear and abrasion. Due to the presence of glass fibers, the material is abrasive and can cause more wear on cutting tools. Therefore, we use tools made of materials that can withstand abrasiveness, such as carbide or polycrystalline diamond (PCD). Glass-filled materials may require lower speeds to prevent excessive tool wear, so we adjust the cutting speed and feed rates to optimize the machining process.
Glass-filled materials can generate a significant amount of dust during machining. We implement an effective dust collection system to maintain a clean working environment and protect both the machine and the operators. After machining, we inspect the finished parts for any signs of tool wear, surface defects, or dimensional inaccuracies. Additional post-processing steps, such as polishing, may be required depending on the application and desired surface finish.
Tabla de propiedades of Nylon 6 30% Glass Filled
| PROPIEDADES MECÁNICAS | |
|---|---|
| Resistencia a la tracción | 113-138.1 MPa |
| Límite elástico | 111-137 MPa |
| Módulo de Young | 6.5-8.1 GPa |
| Alargamiento a la rotura | 2.81-4.05% |
| Dureza | 35.6-39.4 HV |
| Flexural Strength | ~170 MPa |
| Impact Strength | ~45 kJ/m² |
| Elasticidad | Alta |
| Módulo de elasticidad | ~6 GPa |
| Creep Resistance | Bien |
| Resistencia al desgaste | Bien |
| Maquinabilidad | Moderado |
| Moldability | Bien |
| Propiedades físicas | |
| Resistencia UV | Feria |
| Ductilidad y flexibilidad | Moderado |
| Densidad | ~1.40 g/cm³ |
| Peso | Light |
| Resistencia a la temperatura | Up to approximately 120°C(248°F) |
| Resistencia química | Good resistance to many chemicals |
| Porosidad | Bajo |
| Propiedades térmicas | |
| Temperatura máxima de servicio | 90-131°C |
| Coeficiente de dilatación térmica | 38.9-40.3 x 10^-6/°C |
| Conductividad térmica | 0.445-0.463 W/(m·°C) |
| Propiedades eléctricas | |
| Seguridad ESD | No |
Conocimientos básicos of Nylon 6 30% Glass Filled
What is Nylon 6 30% Glass Filled?
Nylon 6 30% Glass Filled refers to a type of engineering thermoplastic material known as Nylon 6 that has been reinforced with 30% by weight of glass fiber. Nylon 6 itself is a polyamide polymer, and the addition of glass fibers enhances its mechanical and thermal properties. It is commonly used in automotive components, electrical connectors, consumer goods, and structural parts in engineering and machinery. The glass fiber content in the composite can be adjusted to achieve specific performance characteristics tailored to the application's needs.
Advantages of Nylon 6 30% Glass Filled
- Increased Strength and Rigidity
- Estabilidad dimensional mejorada
- Mayor resistencia al calor
- Increased Wear Resistance
- Reduced Creep
- Improved Chemical Resistance
- Ligero
- Cost-Effective Alternative
- Electrical Insulation Properties
- Versatility for Various Applications
Applications of Nylon 6 30% Glass Filled
- Automotive radiator end tanks
- Conectores eléctricos
- Industrial gears
- Sports equipment frames (e.g., tennis racket frames)
- Aerospace structural components
- Medical device housings
- Oil and gas drilling equipment components
- Construction fasteners
- Consumer goods hand tools
- Appliance housings
Machining Nylon 6 30% Glass Filled Preguntas frecuentes
Otros Materiales
Polipropileno (PP)
El polipropileno (PP) es un polímero termoplástico de alta resistencia química, baja densidad, buen aislamiento eléctrico y bajo coste.
Nylon
El nailon (poliamida ) es un termoplástico de ingeniería que puede termoformarse y mecanizarse en una gran variedad de formas.
Garolite G-10
Garolite G-10 es un laminado de fibra de vidrio de alta presión con excelentes propiedades de aislamiento eléctrico, alta resistencia mecánica y resistencia química.
Obtenga un presupuesto exacto Para sus próximos proyectos
No importa que su proyecto sea complicado o sencillo, no importa que sea de metal o de plástico, obtendrá un presupuesto preciso en un plazo de 6 horas.
Pida presupuesto hoy mismo